CW 30 (ABC+CBA)

CW 30 (ABC+CBA)

  • Availability: in stock
Fiber type IMS 65
Density, g / m2 30
Number of layers 2
The direction of fibers in the layers tacking 1 sheet +45°; -45° + 1 sheet -45°; +45;
Sheet size, mm 2 sheets 1550x600
Price: 135.00 $ / sheet
(Base Price: 72.58 $ € / m²)

Discount!

  • 128.25 $ / 5 or more sheets (- 5%)
  • 114.75 $ / 10 or more sheets (- 15%)
  • 108.00 $ / 20 or more sheets (- 20%)

Available Options

Texture ABC+CBA
135.00 $
(Base Price: 72.58 $ € / m²)
0 items in cart, total discount 0%

When ordering this product item, you get  two Carboweave® sheets with a density of 30 g / m2 in different directions of fibers  ABC and CBA with a size of 1550 mm × 600 mm. This will allow you to repair the wing or make a new wing or the whole model using the recommended technology "two layers of fabric in different directions", to make a beam or fuselage. And save money without ordering two full standard sheets of 3100 mm.

If you need two sheets of 1550 mm × 600 mm of different density, for example CW 30 + CW 20, or CW 20 + CW 40, write to us about this in the comments to the order or by mail shop@cn-models.com and we will make an individual order for you

Density: 30 g/m2 

Fiber type: IMS 65 (Intermediate Modulus Carbon Fiber IMS65 E23 24K 830tex).
Number of layers: 2 
The direction of fibers in the layers tacking: 1 sheet  +45°; -45°  + 1 sheet  -45°; +45;
Sheet size: ABC 1550 mm × 600 mm + CBA 1550 mm × 600 mm

This carbon fabric is ideal for the manufacture of all ultra-light parts glider / aircraft / sailplane models, especially for stabilizer and fin of DLG glider models.
When manufacturing very thin parts, such as trailing edges of wings and tails of model airplanes, it could be possible that these are becoming warped if no mirrored lay-ups are used. For this reason we offer the Carboweave CW 30 in +/- 45° and in -/+ 45° fiber orientation.

Applications:
This type of carbon fabric often used for the manufacture glider models of classes F3J, F5J, F3F, F3K, F1A, F1B, F1C, RC / DLG glider / aircraft / sailplane models/ free flight models/control line models. Unmanned aerial vehicles (UAV, drone).
Manufacture of heavy-duty fishing rods, tubes and similar structures.
We are offer our customers the next generation of ultra lightweight carbon fabrics, which show a difference in quality through their appearance quite clearly. The fiber distribution is much more homogeneous, thus the fabric itself does not incorporate clusters of fibers or holes. The fibre orientation –this is the even more important criteria– is absolutely straight and virtually free of undulation. Furthermore an improved surface quality is achieved in comparison to its predeceasing material.

Fiber properties:
IMS carbon fibers (Intermediate modulus) are specifically suited for lightweight applications. In comparison with standard carbon fibers, as for example Tenax® HTS40 or Torayca® T300, this fiber provides approx. 20 % increased tensile modulus and ca. 50 % increased tensile strength at an increased elongation at break. Tensile strength, MPa = 6000, tensile modulus, GPa = 290, elongation at break, % = 1,9. 
Toho Tenax® carbon fibers IMS series are tailored to suit applications where strength and stiffness are of ultimate priority. To accommodate this, they are featuring an increase in tensile strength and modulus compared to the usual high tenacity carbon fiber type, leading to unique performances in laminates. Sophisticated components with low wall thicknesses profit from these properties.
Versions with Tenax® IMS65 for very robust available.

Tags: CW 30 (ABC+CBA)

Write a review

Note: HTML is not translated!
    Bad           Good