CW 60 3/45+/45-/0
- Availability: in stock
|Fiber type||IMS 65|
|Density, g / m2||60|
|Number of layers||3|
|The direction of fibers in the layers tacking||+45°; -45°;0°/ -45;+45°;0°|
|Sheet size, mm||3100x600|
185.00 $ / sheet
- 183.73 $ / 5 or more sheets (- 5%)
- 164.39 $ / 10 or more sheets (- 15%)
- 154.72 $ / 20 or more sheets (- 20%)
Three-layer Carboweave carbon fabrics were specially developed for the manufacture and repair of fuselages of all types of glider models. They can also be used for the production of wing power elements, such as spars, where torsional rigidity is important (this provides 2 layers glued at 45 degrees) and deflection rigidity (the third layer is responsible for this).
Density: 60 g/m2.
Fiber type: IMS 65 (Intermediate Modulus Carbon Fiber IMS65 E23 24K 830tex).
Number of layers: 3.
The direction of fibers in the layers tacking: -45°; +45°; 0° or +45°; -45°; 0°.
Standard sheet size: 3100 mm × 600 mm.
This type of Carboweave carbon fiber is specially developed for the manufacture and repair of fuselages of all types of glider models.
We are offer our customers the next generation of ultra lightweight carbon fabrics, which show a difference in quality through their appearance quite clearly. The fibre distribution is much more homogenous, thus the fabric itself does not incorporate clusters of fibres or holes. The fibre orientation –this is the even more important criteria– is absolutely straight and virtually free of undulation. Furthermore an improved surface quality is achieved in comparison to its predecessing material.
Fiber properties: IMS carbon fibres (Intermediate modulus) are specifically suited for lightweight applications. In comparison with standard carbon fibres, as for example Tenax® HTS40 or Torayca® T300, this fibre provides approx. 20 % increased tensile modulus and ca. 50 % increased tensile strength at an increased elongation at break. Tensile strength, MPa = 6000, tensile modulus, GPa = 290, elongation at break, % = 1,9.
Toho Tenax® carbon fibers IMS series are tailored to suit applications where strength and stiffness are of ultimate priority. To accommodate this, they are featuring an increase in tensile strength and modulus compared to the usual high tenacity carbon fiber type, leading to unique performances in laminates. Sophisticated components with low wall thicknesses profit from these properties.
Versions with Tenax® IMS65 for very robust available.
Tags: CW 60 3/45+/45-