CN Spinner 30 / 3.17 / 28.5

CN Spinner 30 / 3.17 / 28.5

  • Availability: 30

Ø of cone 30
Ø motor shaft or hole in the collet 3.17
Distance between the axes of the blades, mm 28.5
Prop hinge pin diameter, mm 3
Prop blade root width 6
Price: 27.00 $

CN Spinner with diameter 30 mm was designed for inrunner motors, which are fixed on the frame in the traditional way (by front side of a motor).

Diametr motor shaft or hole in the collet = 3.17 mm; distance between the axes of the blades = 28.5 mm the blade tilt angle = 0.

The aluminum hub with  replaceable collet is developed for pilots, who want to take full advantage of the capabilities of his glider.

The construction is light and strong. The existence of collet will allow to use the same spinner for the motors with different diameters of shafts.

You can  easily and quickly replace both the blades on the CN Spinner or the entire spiner if the weather changes.

The hub and collet are made by milling of aluminum with further anodizing.

The shape of the hub will allow to fold the blades closer to the fuselage for drag reduction when gliding.
The shockproof 
cone is cast in glass-nylon composite.

Tags: CN Spinner 30 / 5 / 28.5

Write a review

Note: HTML is not translated!
    Bad           Good