CN Spinner Pro 30 / 5 / 24
- Availability: 16
| Ø of cone | 30 |
| Ø motor shaft or hole in the collet | 5 |
| Distance between the axes of the blades, mm | 24 |
| Prop hinge pin diameter, mm | 3 |
| Prop blade root width | 6 |
CN Spinners Pro with diameter 30 mm was designed for inrunner motors, which are fixed on the frame in the traditional way (by front side of a motor).
Diametr motor shaft or hole in the collet = 5 mm; distance between the axes of the blades = 24 mm the blade tilt angle = 0.
The aluminum hub with replaceable collet is developed for pilots, who want to take full advantage of the capabilities of his glider.
The construction is light and strong. The existence of collet will allow to use the same spinner for the motors with different diameters of shafts.
You can easily and quickly replace both the blades on the CN Spinner Pro 30 or the entire spiner if the weather changes.
The hub and collet are made by milling of aluminum with further anodizing.
The shape of the hub will allow to fold the blades closer to the fuselage for drag reduction when gliding.
The shockproof cone on CN Spinner Pro 30 is cast in glass-nylon composite.
The weight of the complete set is 14.6 grams.
Related Products
CN Motor mount D 30/reisenauer gearbox
The CN Motor mount D 30 / reisenauer gearbox - iis an elegant CNC machined motor moun..
20.00 $
CN Motor mount D 30 multi
The CN Motor mount D 30 multi - is an elegant CNC machined motor mount for securel..
20.00 $
CN Motor mount D 30 / tenshock
The CN Motor mount D30/tenshock - is an elegant CNC machined motor mount for secur..
20.00 $